- Written by Josh Baakko
- Category: Hints and Tips to aid Modeling Projects
- Hits: 669
Avoiding Paint Clean-up Confusion
How I avoid dipping water based paints in thinner.
Short, simple, and easy tip to avoid clean up issues.
When painting with a brush, there were times where I would mistaken an Acrylic
for an Enamel and dip the brush in thinner. If you've ever dipped an Acrylic in
thinner, you'll know, trying to water wash it afterwards always stinks! You can't
get all the paint off, and wind up letting it dry then re-dipping it in the thinner. I've
come up with a short, and simple tip to relieve that issue.
In a previous article (Painting Fine Mesh Grills (HO & Smaller)) I used an
Elmer's "painters" paint pen to color grills.
Page 2 of 2