No Room Under the Layout for a Switch Machine
Locating switch machines and solenoids where space below the railroad is a problem.
If you're like me space is a limiting factor in positioning switch machines or solenoids under the layout.
A simple trick is to put them on top of the layout but hide them inside a lineside structure, that way, if you get a problem you just lift the structure and you can get at it without any fuss. To make the connection from my solenoids to the turnout tie bar I use 1mm MIG welding wire bent to suit the location, it works fine for me and costs very little. [Ed Note: The author used MIG welding wire, which is suitable but may be cost prohibitive. Search local hobby shops, or online, for "Piano wire," which is a suitable replacement and may be more cost effective if you don't have MIG welding wire readily accessible.]
© 2006/2020, Steve B, https://www.modelrailroadtips.com